Zhangjiagang Modern Machinery Co.,Ltd.
More than 20 years technology & experience on bottle filling machine!
+86-137 3726 7104
Automatic Mineral Water Bottling Machine is used to produce polyester bottled mineral water, purified water, alcoholic beverage machinery and other non gas beverage machinery. Automatic Mineral Water Bottling Machine can complete all the processes of bottle pressing, filling and sealing, which can reduce the contact time between materials and the outside, improve sanitary conditions, production capacity and economic benefits.
The rotating wheel is fully SUS304 stainless steel welded structure.
The bottle clamp can pollute the screw position of the bottle and avoid the screw thread pollution caused by the rubber clamp block of the traditional bottle clamp. The clamp is made of SUS304 stainless steel, hygienic and durable.
The high efficiency atomizing nozzle installed on the bottle clamp can clean any part of the inner wall of the bottle and save flushing water.
Igus (Germany) corrosion and maintenance free bearings are used for all sliding bushings of the lifting device.
The rinser is driven by a drive system located inside the frame via a gear drive.
Transfer star wheel
Made of high quality stainless steel.Bottle stopper protection device is installed.
The rotating wheel is made entirely of SUS 304 stainless steel.
Gravity filling method.
The filling valve is made of SUS316L.
The structure of the filling valve is reasonable and the filling is accurate.
The filling flow rate can reach 200ml / s.
Under the action of the cam, the bottle moves up and down through the elevator to fill in the way of contacting the bottle mouth.
The height of the cylinder is controlled by a floating ball.
The filling machine is driven by gears inside the frame.
The connecting rod wheels in the rinser, filling machine and capping machine are transported in some annular supports.
The bottle cap distribution chute is equipped with a reverse bottle cap stop and a reverse bottle cap taking out mechanism.
The cap distribution chute is equipped with a photoelectric switch to stop the bottle capping device when there is no cap in the chute.
The capping machine is equipped with water bottle detection switch.
The centrifugal bottle cap arrangement is adopted to reduce the damage of the bottle cap.
The cover inspection system is aligned with the switch that controls the elevator.
Model
|
Heads of
washing filling sealing |
Production
capacity (bottle/hour) |
Suitable
bottle diameter (mm) |
Spraying
pressure (kg/cm2) |
Main
motor power (kw) |
Overall dimension
(LxWxH) (mm) |
Weight
(kg) |
XGF16126
|
16-12-6
|
2000-4000
|
Φ=50- 110=170
330- 2250ml |
2-3
|
2.2kw
|
2400x1650x2500
|
2500
|
XGF18186
|
18-18-6
|
5000-7000
|
2.2kw
|
2600x1920x2550
|
3500
|
||
XGF24248
|
24-24-8
|
8000-12000
|
3kw
|
3100x2300x2800
|
4500
|
||
XGF323210
|
32-32- 10
|
12000- 15000
|
5.5kw
|
3800x2800x2900
|
6500
|
||
XGF404012
|
40-40- 12
|
16000- 20000
|
7.5kw
|
4600x2800x2900
|
8500
|
||
XGF505012
|
50-50- 12
|
20000- 24000
|
11kw
|
5450x3300x2900
|
9800
|
||
XGF606015
|
60-60-15
|
25000- 30000
|
15kw
|
6500x4500x2900
|
12800
|
Leave a Reply