Zhangjiagang Modern Machinery Co.,Ltd.
More than 20 years technology & experience on bottle filling machine!
Email address
Phone/Whatsapp
+86-137 3726 7104
Automatic PET Water Bottling Machine
Category: Water Bottling Machine
Previous: Small Water Bottling Machine
InquireInquire
Ｘ- Product Description
- Technical parameter
- Video
- Inquire
Product Description
Automatic PET Water Bottling Machine is mainly used for water filling. Set cleaning, filling, sealing in one, to achieve full automation of the whole process, suitable for mineral water, pure water polyester bottles, plastic bottles filling. Suitable for various parts of the bottle type, easy to adjust, convenient and fast. The new micro negative pressure filling is stable and reliable. Compared with machines of the same specification, this machine has more advantages.
Main features:
| Rinser | The bottle enters into the rinsing part of Automatic PET Water Bottling Machine through air conveyor. The grippers take the bottles from the inlet star-wheel while they are still driven by the star-wheel, thus guaranteeing a safe grip. After the gripping, the bottle is turned upside down with 180 degree and cantered above a spraying nozzle which directs a stream of rinse water into the bottle. After the draining period the bottle is turned over to an upright position again to filling machine. |
| Rotary wheel fully made of stainless steel SUS 304. Gravity filling method. Filling valves are made of SUS316L. Filling valves are reasonably structured with accurate filling. Filling flow can reach 200ml per second. Bottles go up and down in the function of cam through elevator, to process filling with contact to bottle-mouth. Level of cylinder is controlled with float-ball. Filler is driven through gears inside the machine frame. Link-wheels in rinser, filler and capper are transported in ringed support of bottle-neck |
Filling heads |
| Capper | 1 Place and capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping 2 All 304/316 stainless steel construction 3 No bottle no capping 4 Automatic stop when lack of bottle |
| The machine frame is a welded structure of high quality carbon steel with the surface anti-rust treated and coated. The machine frame is wrapped with stainless steel sheet (ANSI304). Driving system of the 3-in-1 unit is positioned under the machine table. One main motor provides driving power via gear transmission. The gear transmission system is an interleaved arrangement of steel gears and nylon gears. The output shaft of the main motor is equipped overload protection to secure machine safety. Electrical control The electrical cabinet is made of coated carbon steel. From bottle infeed to bottle discharge, a PLC controls the fully automatic operation of the 3-in-1 unit. |
Frame |
Filling machine machining center
Technical parameter
|
Model
|
Heads of
washing filling sealing |
Production
capacity (bottle/hour) |
Suitable
bottle diameter (mm) |
Spraying
pressure (kg/cm2) |
Main
motor power (kw) |
Overall dimension
(LxWxH) (mm) |
Weight
(kg) |
|
XGF16126
|
16-12-6
|
2000-4000
|
Φ=50- 110=170
330- 2250ml |
2-3
|
2.2kw
|
2400x1650x2500
|
2500
|
|
XGF18186
|
18-18-6
|
5000-7000
|
2.2kw
|
2600x1920x2550
|
3500
|
||
|
XGF24248
|
24-24-8
|
8000-12000
|
3kw
|
3100x2300x2800
|
4500
|
||
|
XGF323210
|
32-32- 10
|
12000- 15000
|
5.5kw
|
3800x2800x2900
|
6500
|
||
|
XGF404012
|
40-40- 12
|
16000- 20000
|
7.5kw
|
4600x2800x2900
|
8500
|
||
|
XGF505012
|
50-50- 12
|
20000- 24000
|
11kw
|
5450x3300x2900
|
9800
|
||
|
XGF606015
|
60-60-15
|
25000- 30000
|
15kw
|
6500x4500x2900
|
12800
|
Video
Inquire
Leave a Reply