Bottle Mineral Water Bottling Machine

The production process Bottle Mineral Water Bottling Machine is as follows: There are three functions of feeding bottles to the bottle feeding machine through the star wheel dial in the air feeding bottle. The sealing machine is installed on the rear-wheel cassette-type stainless steel bottle clamp, and the bottle neck clamp rotates 180° along the guide rail to lower the bottle.

After washing the bottle, the star wheel in the bottle is sent to the filling machine through the punching machine outlet. The bottling machine that fills the bottleneck bottle is held by the live bottle, and is raised and lowered through the lifting mechanism under the action of the CAM.

Bottle Mineral Water Bottling Machine adopts gravity filling method, and the bottle filling valve starts to rise. When the material reaches the end of the plug hole, fill it backwards.

Stop the screw cap of the screw cap on the screw cap holding the bottle neck to keep the bottle upright and prevent rotation.

The finished bottles are transferred from the capping machine bottle to the bottle on the conveyor chain through the thumb screw bottle, and then sent to the three-in-one filling machine by the conveyor chain. The bottle filling valve starts to rise. When the material reaches the end of the plug hole, fill it backwards.

The machine adopts a console window, which is beautiful and generous.

Filling machine machining center