• Complete Water Production Line
  • Complete Water Production Line
  • Complete Water Production Line
  • Complete Water Production Line

Complete Water Production Line

Product Description

Complete Water Production Line Description:

Complete water production line is suitable for the filling of 150-1500ml bottled water. The filling measurement is accurate, no bubbles, no drips, short filling cycle and high production capacity. Powerful PLC software support can realize the ideal filling operation. Man-machine friendly interface, all operations are completed on the touch-screen color screen.

Complete Water Production Line

No need to add spare parts to replace the filling specifications, just make adjustments to complete. Users can choose the number of filling heads of the water filling machine according to their own production capacity

The bottle enters the three-in-one water filling machine under the action of the wind through the air duct for washing, filling and capping.

Complete Water Production Line

In the water production line, there are two options for lid sterilization:

1. Equipped with a bottle cap disinfection cabinet. After the bottle caps are disinfected, the capping machine sends the bottle caps to the cap sorting device, and slides to enter the capping device.

2. Equipped with an online bottle cap disinfection machine. First, the capping machine sends the bottle caps into the cap sorting device, then enters the disinfection machine, and sequentially performs disinfection water rinse, sterile water rinse, air-drying, and finally slides to the seal Cover part.

Complete Water Production Line

 

Complete Water Production Line Service:

MODERN MACHINERY offers engineer to assist you in installing your water production line. Upon installation of your equipment or line, the engineer stays on-site to watch your new equipment run smoothly and train your operators. Even after our specialist leaves your plant, we are ready to give you timely, courteous service when you need it.

Complete Water Production Line

Our engineer offers the following services:

1. Installation of equipment or packaging line at the customer’s plant
2. Coordinate schedule with mechanics to perform changeovers and preventive maintenance activities
3. Perform mechanical adjustments (if needed) on equipment and packaging line to optimize equipment’s performance
4. Resolve equipment issues
5. Provide on-site training on all assigned procedures

An MODERN MACHINERY engineer will be in-charge of the equipment setup and adjustment in your plant. All of the activities will be focused on optimizing the equipment to maximize production output.

 

Shipping & Transportation

Complete Water Production Line

Technical parameter
Model
 Heads  of
washing  filling
sealing
 Production
capacity
(bottle/hour)
 Suitable
bottle
diameter
(mm)
 Spraying
pressure
(kg/cm2)
 Main
motor  power
(kw)
 Overall  dimension
(LxWxH)
(mm)
 Weight
(kg)
 XGF16126
 16-12-6
 2000-4000
 Φ=50-  110=170
330-  2250ml
 2-3
 2.2kw
 2400x1650x2500
 2500
 XGF18186
 18-18-6
 5000-7000
 2.2kw
 2600x1920x2550
 3500
 XGF24248
 24-24-8
 8000-12000
 3kw
 3100x2300x2800
 4500
 XGF323210
 32-32- 10
 12000- 15000
 5.5kw
 3800x2800x2900
 6500
 XGF404012
 40-40- 12
 16000- 20000
 7.5kw
 4600x2800x2900
 8500
 XGF505012
 50-50- 12
 20000- 24000
 11kw
 5450x3300x2900
 9800
 XGF606015
 60-60-15
 25000- 30000
 15kw
 6500x4500x2900
 12800
Video

Inquire

Leave a Reply

Your email address will not be published. Required fields are marked *