• Juice Beverage Filling Equipment
  • Juice Beverage Filling Equipment
  • Juice Beverage Filling Equipment
  • Juice Beverage Filling Equipment

Juice Beverage Filling Equipment

Product Description

Juice Beverage Filling Equipment Description:

Juice beverage filling equipment is suitable for orange juice, pear juice, mango juice, strawberry juice, blueberry juice and other juice drinks. The juice beverage filling machine adopts a sanitary filling head system, an umbrella flow structure, fast filling speed, and filling head that can meet the requirements of full filling and sanitation.

Juice Beverage Filling Equipment

The bottle is sent to the rinsing mechanism by rotating the dial wheel, the bottle clamp is opened, and the bottle mouth is clamped. The bottle clamp is turned 180° by the guide rail to make the bottle mouth downward. To achieve high-pressure flushing of the inner wall of the bottle from bottom to top, the flushing time is about 3-5s. After rinsing, rotate 180° counterclockwise again, put the bottle down, and transfer to the juice beverage filling machine by rotating the dial.

Juice Beverage Filling Equipment

The juice beverage filling machine is equipped with a constant temperature circulation system, automatic temperature control, and automatic reflux. The juice beverage filling equipment uses the filling head to move up and down, and the bottles run on the same level to ensure the stability of the bottles in and out.

Juice Beverage Filling Equipment

 

Juice Beverage Filling Machine Service:

MODERN MACHINERY offers engineer to assist you in installing your juice beverage filling equipment. Upon installation of your equipment or line, the engineer stays on-site to watch your new equipment run smoothly and train your operators. Even after our specialist leaves your plant, we are ready to give you timely, courteous service when you need it.

Juice Beverage Filling Equipment

Our engineer offers the following services:

1. Installation of equipment or packaging line at the customer’s plant
2. Coordinate schedule with mechanics to perform changeovers and preventive maintenance activities
3. Perform mechanical adjustments (if needed) on equipment and packaging line to optimize equipment’s performance
4. Resolve equipment issues
5. Provide on-site training on all assigned procedures

An MODERN MACHINERY engineer will be in-charge of the equipment setup and adjustment in your plant. All of the activities will be focused on optimizing the equipment to maximize production output.

 

Shipping & Transportation

Juice Beverage Filling Equipment

Spread the love
Technical parameter
Model
 Heads of washing,
filling, sealing
 Production
capacity(bottle/
hour)
 Suitable bottle
height
 Spraying
pressure
 Total Power
 Outer Dimension
(mm)
 Weight
 XGFR16126
 16-12-6
 3000-4000
H=170-320
0.25-0.3
 1.5+0.37
 2300×1680×265
 2600
 XGFR18186
18-18-6
 5000-7000
Φ=50-100
330 ~ 1500ml)
 2.2+0.37
 2500×1760×2650
 3500
 XGFR24248
2 4-24-8
 8000-12000
 3+0.45+0.25
 3100×2100×2650
 4650
 XGFR32328
 32-32-8
 12000-15000
 5.5
 3800×2800×2650
 6800
 XGFR404010
 40-40-10
16000-18000
 7.5
 4000×3300×3400
 8500
 XGFR484812
 48-48-12
 20000-24000
 11
 4850×3650×3300
 1000
 XGFR606015
 60-60-15
 24000-28000
 15
 6500×5400×3500
 12500
Video

Inquire

Leave a Reply

Your email address will not be published. Required fields are marked *

Please enter your message


    en_USEnglish