• Juice Filling Production Line
  • Juice Filling Production Line
  • Juice Filling Production Line
  • Juice Filling Production Line

Juice Filling Production Line

Product Description

Juice Filling Production Line Description:

Juice filling production line is suitable for filling and producing 500ml, 1L, 1.25L and other capacity PET plastic bottled juice beverages. The juice filling machine integrates washing, filling and sealing. Its filling method adopts micro-negative pressure hot filling to ensure that the material is filled at the set temperature, such as 85°C. Based on 500ml PET plastic bottles, the production speed of the three-in-one juice filling equipment can reach 2000 bottles/hour-28000 bottles/hour.

Juice Filling Production Line

In terms of electricity, the juice filling machine adopts programmable logic controller PLC and inverter control and independent electric box, and is dust-proof and moisture-proof to avoid electrical short-circuit damage in a humid environment, causing unnecessary trouble. Through frequency modulation switch and inverter control, the juice filling machine can realize stepless speed change, which can match the production speed of the juice filling production line.

Juice Filling Production Line

 

Juice Filling Machine Service:

MODERN MACHINERY offers engineer to assist you in installing your juice production line. Upon installation of your equipment or line, the engineer stays on-site to watch your new equipment run smoothly and train your operators. Even after our specialist leaves your plant, we are ready to give you timely, courteous service when you need it.

Juice Filling Production Line

Our engineer offers the following services:

1. Installation of equipment or packaging line at the customer’s plant
2. Coordinate schedule with mechanics to perform changeovers and preventive maintenance activities
3. Perform mechanical adjustments (if needed) on equipment and packaging line to optimize equipment’s performance
4. Resolve equipment issues
5. Provide on-site training on all assigned procedures

An MODERN MACHINERY engineer will be in-charge of the equipment setup and adjustment in your plant. All of the activities will be focused on optimizing the equipment to maximize production output.

 

Shipping & Transportation

Juice Filling Production Line

Spread the love
Technical parameter
Model
 Heads of washing,
filling, sealing
 Production
capacity(bottle/
hour)
 Suitable bottle
height
 Spraying
pressure
 Total Power
 Outer Dimension
(mm)
 Weight
 XGFR16126
 16-12-6
 3000-4000
H=170-320
0.25-0.3
 1.5+0.37
 2300×1680×265
 2600
 XGFR18186
18-18-6
 5000-7000
Φ=50-100
330 ~ 1500ml)
 2.2+0.37
 2500×1760×2650
 3500
 XGFR24248
2 4-24-8
 8000-12000
 3+0.45+0.25
 3100×2100×2650
 4650
 XGFR32328
 32-32-8
 12000-15000
 5.5
 3800×2800×2650
 6800
 XGFR404010
 40-40-10
16000-18000
 7.5
 4000×3300×3400
 8500
 XGFR484812
 48-48-12
 20000-24000
 11
 4850×3650×3300
 1000
 XGFR606015
 60-60-15
 24000-28000
 15
 6500×5400×3500
 12500
Video

Inquire

Leave a Reply

Your email address will not be published. Required fields are marked *

Please enter your message


    en_USEnglish