• Juice Production Machine
  • Juice Production Machine
  • Juice Production Machine

Juice Production Machine

Product Description

Juice Production Machine Description:

Juice production machine is fully automatic filling equipment integrating bottle washing, filling, and sealing. A constant temperature system is added for the filling and sealing of hot juice beverages packed in plastic bottles.

Juice Production Machine

Juice production line adopts microgravity negative pressure filling technology, filling is more rapid, stable and accurate, the juice production equipment is equipped with perfect reflux system, to avoid the secondary pollution and oxidation of drinks; juice production equipment can meet the technical requirements of hot filling below 95℃, and is equipped with CIP cleaning system, which can clean the liquid contact places such as cylinder and pipeline.

Juice Production Machine

Juice production equipment work can be generally divided into three steps: bottle washing, filling, capping, three steps in a machine to complete.

Empty bottles with curved good stainless steel rail, arrived in vertical position, this bottle is vertical downward, the machine run, in a dish can go to that place start rinses, rushed after good arrived in filling area, we drink mineral water there is a small platform under the security circles, the general and the diameter of the lid is the same, the platform just the card on the TuoPing block, The spool tube is inserted into the bottle, and after a certain distance, the top of the spool is opened, and the valve is opened to fill.

Juice Production Machine

The filling automatically follows the CAM track down (in which there is a CAM track) with the bearing walking on top (cylindrical CAM).

Swing cap. Swing cap has a sensor, which also uses the mouth of the bottle. If you go over, you will scrape the sensor.

 

Juice Production Line Service:

MODERN MACHINERY offers engineer to assist you in installing your juice production line. Upon installation of your equipment or line, the engineer stays on-site to watch your new equipment run smoothly and train your operators. Even after our specialist leaves your plant, we are ready to give you timely, courteous service when you need it.

Juice Production Machine

Our engineer offers the following services:

1. Installation of equipment or packaging line at the customer’s plant
2. Coordinate schedule with mechanics to perform changeovers and preventive maintenance activities
3. Perform mechanical adjustments (if needed) on equipment and packaging line to optimize equipment’s performance
4. Resolve equipment issues
5. Provide on-site training on all assigned procedures

An MODERN MACHINERY engineer will be in-charge of the equipment setup and adjustment in your plant. All of the activities will be focused on optimizing the equipment to maximize production output.

 

Shipping & Transportation

Juice Production Machine

Technical parameter
Model
 Heads of washing,
filling, sealing
 Production
capacity(bottle/
hour)
 Suitable bottle
height
 Spraying
pressure
 Total Power
 Outer Dimension
(mm)
 Weight
 XGFR16126
 16-12-6
 3000-4000
H=170-320
0.25-0.3
 1.5+0.37
 2300×1680×265
 2600
 XGFR18186
18-18-6
 5000-7000
Φ=50-100
330 ~ 1500ml)
 2.2+0.37
 2500×1760×2650
 3500
 XGFR24248
2 4-24-8
 8000-12000
 3+0.45+0.25
 3100×2100×2650
 4650
 XGFR32328
 32-32-8
 12000-15000
 5.5
 3800×2800×2650
 6800
 XGFR404010
 40-40-10
16000-18000
 7.5
 4000×3300×3400
 8500
 XGFR484812
 48-48-12
 20000-24000
 11
 4850×3650×3300
 1000
 XGFR606015
 60-60-15
 24000-28000
 15
 6500×5400×3500
 12500
Video

Inquire

Leave a Reply

Your email address will not be published. Required fields are marked *