PET Small Water Bottling Machine

Product Description

PET Small Water Bottling Machine is used to produce polyester bottled mineral water, purified water, alcoholic beverage machinery and other non gas beverage machinery. PET Small Water Bottling Machine can complete all the processes of bottle pressing, filling and sealing, which can reduce the contact time between materials and the outside, improve sanitary conditions, production capacity and economic benefits.

PET Small Water Bottling Machine

Cleaning part of purified water mineral water bottling machine:

The rotating wheel is fully SUS304 stainless steel welded structure.
The bottle clamp can pollute the screw position of the bottle and avoid the screw thread pollution caused by the rubber clamp block of the traditional bottle clamp. The clamp is made of SUS304 stainless steel, hygienic and durable.
The high efficiency atomizing nozzle installed on the bottle clamp can clean any part of the inner wall of the bottle and save flushing water.
Igus (Germany) corrosion and maintenance free bearings are used for all sliding bushings of the lifting device.
The rinser is driven by a drive system located inside the frame via a gear drive.
Transfer star wheel
Made of high quality stainless steel.Bottle stopper protection device is installed.


Filling part of pure water mineral water bottling machine:

Rotary wheel entirely made of SUS 304 stainless steel.
Gravity filling method.
Filling valve is made of SUS316L.
Filling valve reasonable structure, accurate filling.
The filling flow can reach 200ml/s.
Under the action of the cam, the bottle moves up and down by the elevator to fill the way that it contacts the bottle mouth.
Height of the cylinder is controlled by a float.
The filling machine is driven by a gear inside the frame.
Link wheel washer, filling machine and capping machine in the transport of certain annular support.


Cover parts of pure water mineral water bottling machine:

Bottle cap dispensing chute plus reverse and a reverse stopper cap removal mechanism.
Distribution chute cap with the photoelectric switch, when the chute is no cap, the cap means is stopped.
Capping machine kettle equipped with a detection switch.
Centrifugal cap is arranged to reduce damage to the cap.
The inspection system and cover the elevator control switches are aligned.

Filling machine machining center

Filling machine parts machining

Container loading and shipping

Spread the love
Technical parameter
 Heads  of
washing  filling
motor  power
 Overall  dimension
 Φ=50-  110=170
330-  2250ml
 32-32- 10
 12000- 15000
 40-40- 12
 16000- 20000
 50-50- 12
 20000- 24000
 25000- 30000


Leave a Reply

Your email address will not be published. Required fields are marked *

Please enter your message