PET Water Bottling Machine

Product Description

PET Water Bottling Machine is mainly used for water filling. Set cleaning, filling, sealing in one, to achieve full automation of the whole process, suitable for mineral water, pure water polyester bottles, plastic bottles filling. Suitable for various parts of the bottle type, easy to adjust, convenient and fast. The new micro negative pressure filling is stable and reliable. Compared with machines of the same specification, this machine has more advantages.

PET Water Bottling Machine

Main features: 
The rotary wheel is a fully SUS304 stainless steel welded structure. 
PET Water Bottling Machine applies unique overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck position, avoiding bottle mouth thread contamination caused by rubber gripper block of a traditional bottle clamp. Made of SUS304 stainless steel, this bottle clamp is hygienic and durable. 
The high efficiency atomizing spay nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water. 
All sliding bushes of lifting device use igus (Germany) anti-corrosion maintenance free bearing. 
The rinser is driven by driving system positioned inside machine frame via gear transmission. 
Transfer starwheel
Made of stainless steel of superior quality. 
Equipped with bottle jam protection device. 
Long tube filling type with 2 times filling process to make sure perfect filling level Liquid tank, filling valves, controlling rings, upgrading cylinder.
High speed and mass flow filling valve ensures the high filling speed and exact fluid level. Parts contacting liquid are all made of excellent stainless steel or food grade engineering plastic.
Filling heads
Capper Capper is the machine with highest precision, influence very much with the stability and reliability of the filling monoblock. Our capper features as follows: 
Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism. 
Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute. 
The capper is equipped with inlet bottle detection switch. 
Centrifugal way of cap arranging is adopted to reduce damage of caps. 
A cap inspecting system is applied to control on-off of elevator. 
1. Air conveyor is fixed on the floor, with fan installed on the top. 
2. Air filter is positioned at every entrance of air fan, to prevent dust blown into bottles.
3. Bottles are held on the neck in the conveyor and transported into filling machine by blowing power. 
4. All are made of stainless steel SUS 304 /316.
5. Rack made by high quality SUS304 welded.
Air Conveyor
Filling machine machining center

Filling machine parts machining

Container loading and shipping

Spread the love
Technical parameter
 Heads  of
washing  filling
motor  power
 Overall  dimension
 Φ=50-  110=170
330-  2250ml
 32-32- 10
 12000- 15000
 40-40- 12
 16000- 20000
 50-50- 12
 20000- 24000
 25000- 30000


Leave a Reply

Your email address will not be published. Required fields are marked *

Please enter your message