Zhangjiagang Modern Machinery Co.,Ltd.
More than 20 years technology & experience on bottle filling machine!
+86-137 3726 7104
Small bottle water filling line is suitable for the filling of 350-1500ml bottled pure water, mineral water and drinking water. The filling method is rotary filling, the filling valve is designed with a special structure, the filling speed is fast and stable, and the efficiency is high. The sealing part is automatically fed and sealed. Small bottle water filling machine improves the degree of automation, reduces the floor space, reduces the number of operators, and reduces labor costs.
1. The water filling line adopts the technology of direct connection between the air duct and the bottle feeding wheel. The bottle feeding wheel adopts an innovatively designed bottle mouth clamping mechanism with bottle separation function. Only a few parts need to be replaced and adjusted to change the bottle type.
2. Bottle transfers all adopt the bottleneck technology, and the bottle-top bottle clamp is used to replace the traditional dial wheel. The height of the equipment must be adjusted to change the bottle shape, and only a few parts need to be replaced and adjusted.
3. The water filling machine adopts high-efficiency spray nozzles, and the rinsing water is sprayed at a set angle, which can be flushed to any part of the inner wall of the bottle, thoroughly flushing and saving water for rinsing.
4. High-speed and large-flow gravity filling valve, quantitative filling, fast filling speed, accurate liquid level without liquid loss.
5. The capping mechanism is composed of three parts: cap sorting device, capping guide rail and capping machine.
MODERN MACHINERY offers engineer to assist you in installing your water filling line. Upon installation of your equipment or line, the engineer stays on-site to watch your new equipment run smoothly and train your operators. Even after our specialist leaves your plant, we are ready to give you timely, courteous service when you need it.
Our engineer offers the following services:
1. Installation of equipment or packaging line at the customer’s plant
2. Coordinate schedule with mechanics to perform changeovers and preventive maintenance activities
3. Perform mechanical adjustments (if needed) on equipment and packaging line to optimize equipment’s performance
4. Resolve equipment issues
5. Provide on-site training on all assigned procedures
An MODERN MACHINERY engineer will be in-charge of the equipment setup and adjustment in your plant. All of the activities will be focused on optimizing the equipment to maximize production output.
Model
|
Heads of
washing filling sealing |
Production
capacity (bottle/hour) |
Suitable
bottle diameter (mm) |
Spraying
pressure (kg/cm2) |
Main
motor power (kw) |
Overall dimension
(LxWxH) (mm) |
Weight
(kg) |
XGF16126
|
16-12-6
|
2000-4000
|
Φ=50- 110=170
330- 2250ml |
2-3
|
2.2kw
|
2400x1650x2500
|
2500
|
XGF18186
|
18-18-6
|
5000-7000
|
2.2kw
|
2600x1920x2550
|
3500
|
||
XGF24248
|
24-24-8
|
8000-12000
|
3kw
|
3100x2300x2800
|
4500
|
||
XGF323210
|
32-32- 10
|
12000- 15000
|
5.5kw
|
3800x2800x2900
|
6500
|
||
XGF404012
|
40-40- 12
|
16000- 20000
|
7.5kw
|
4600x2800x2900
|
8500
|
||
XGF505012
|
50-50- 12
|
20000- 24000
|
11kw
|
5450x3300x2900
|
9800
|
||
XGF606015
|
60-60-15
|
25000- 30000
|
15kw
|
6500x4500x2900
|
12800
|
Leave a Reply