• water-treatment-plant

Water Treatment Plant

Product Description

Modern This Water Treatment Plant is using reverse osmosis technology for desalination, reverse osmosis membrane was only 0.001 micron pore size, can be harmful to remove dissolved solids and bacteria, viruses, etc., desalination rate of more than 99.6 percent, in line with national standards to produce pure water, the host section contains the security filter, high-pressure pump and reverse osmosis membrane, security filters for the fourth grade and above pre-treatment systems, high-pressure pump is the host of one of the core equipment for the reverse osmosis membrane elements to provide sufficient pressure to overcome the penetration resistance to pressure and run to meet the needs of a device to achieve the rated water.

 

Characteristic of RO Water Treatment Plant

1. Continuous water production without the need of regeneration, reducing labor strength;

2. Ultra-low pressure film imported from USA, with a high desalting rate of 97~98%;

3. Removing 98% of organic matters and bacteria, with a heat source of more than 98;

4. Online electric conductivity monitoring, ensuring good water quality;

5. PLC microcomputer monitoring, flushing the reverse osmosis film at regular intervals.

 

Technical Flow Chart of RO Water Treatment Plant

Raw water → Source water tank → Source water pump → Quartz sand → filter Active Carbon filter → PP sediment filter → RO main machine → Ozone sterilizer → Pure water tank

Technical parameter
Model  RO-1000  RO-2000  RO-3000  RO-4000  RO-5000  RO-10000
 m3/h Production Capacity  1T/H  2T/H  3T/H  4T/H  5T/H  10T/H
 Power kw  1.87  2.05  2.57  2.75  3.25  7.5
 Desalt rate  98%
 Rate of recovery  50-60%
Video
Inquire

Leave a Reply

Your email address will not be published. Required fields are marked *